A variety of different blade simple introduction of beveling machine

Time：2019-11-28Browse：8

There are many types of beveling machines, and the functions of different beveling machines are slightly different, but they are basically the same. Among them, there are many types of beveling machines, and the differences between the beveling machines are also very large. Here are a few examples for everyone to take a look at the several cutting edges of the beveling machine.

     SWRMH-Sealed welding seam clearing head (no tube retention)

Blade: Carbide

angle: 90°

Tailor-made cutter heads are used to remove sealed welds. Suitable for carbon steel, duplex steel, inconel alloy and other special alloys. Uses 4 blade carbide inserts。

OBMH-Outer bevel head

Blade: Carbide

angle: 37.5°

Specially designed precision cutter head is used for pipe outer bevel processing. The size is determined according to the pipe diameter and the required bevel angle. The machining accuracy of the cutter head is very high, so it will not hurt the positioning axis and block.

STWRMH-Intensity welding seam clearing head (does not retain pipe)

Blade: HSS Cobalt 6%

angle: 37.5°

Specially designed cutter head is used for strength welding seam removal. The size of the cutter head is determined according to the diameter of the pipe, and the accuracy is high so that it will not hurt the positioning shaft and the positioning block. Easy to install and easy to use.