News-【Watt】

Pipe welding process technology

Time：2019-11-28 Browse：49

The welding surface of the heating surface pipe, the center line of which is at least 70mm from the outer wall of the pipe and the edge of the support hanger, the distance between the two butt welds should not be less than 150mm;

Pipe Beveling Machine Safety Operation Guide

Time：2019-11-28 Browse：16

Watt is committed to designing and manufacturing safe and high-quality products. The personal safety of users is our primary consideration when designing our products

Points to pay attention to when placing the beveling machine for a long time

Time：2019-11-28 Browse：17

For the beveling machine products that need to be idle for a long time, we should follow the following points when placing the beveling machine:

Important point one: Pay attention to waterproofing for a long time. When the beveling machine is planned to be idle, we should ensure that the place...

Maintenance knowledge of bevel processing equipment

Time：2019-11-28 Browse：24

Inspection should be carried out mainly from the machine tool bed, hydraulic system, and spindle lubrication system. For example, when inspecting the machine tool bed, it mainly depends on whether the accuracy of the machine tool and the level of the machine tool meet the requirements in the manual....

Beveling machine installation and operation procedures

Time：2019-11-28 Browse：40

WATT Pipe Beveling machine installation and operation procedures of the beveling machine follow the principle of safety first, and I would like to remind users to comply with the safety regulations when using this equipment

Card pipeline groove cutting machine how to prevent bump knife

Time：2019-08-15 Browse：56

If cut off and groove need to do at the same time, then no. 1 tool rest is cutting knife is loaded. 2 groove cutter head. Must let 1 advanced knife rest, don't rest 2 advanced knife

What should you pay attention to when using the pipe beveling machine?

Time：2019-05-27 Browse：67

In the process of laying and repairing pipelines such as petrochemicals, food and medical care, fire water supply, etc., we often use pipe beveling machines. So what should you pay attention to when using the pipe beveling machine? Talk about the 12 points you need to pay attention to when using the...

A variety of different blade simple introduction of beveling machine

Time：2019-11-28 Browse：8

There are many types of beveling machines, and the functions of different beveling machines are slightly different, but they are basically the same. Among them, there are many types of beveling machines, and the differences between the beveling machines are also very large. Here are a few examples...

How to safely run pipe beveling machine and flange

Time：2019-05-27 Browse：71

First, the strength and precision of the cutting tool or the die on the pipe beveling machine, the flange machine must meet the cutting requirements of the material to be cut. If it is not met, it must be promptly reacted with the leader, and the cutting tool should be sharp, and whether the cutting...

Join us in the 24th Beijing Essen Welding & Cutting Fair

Time：2019-05-18 Browse：60

The 24th Beijing Essen Welding & Cutting Fair Shanghai New International Expo Center Join the best: 25-28 June,2019 Visit us @ Booth No.: W3754